The Zig-Zag Stitch is a very versatile stitch. Use it for seam finishing, applique, bartacks, satin stitching and more. For some sewing techniques with this stitch, it can be helpful to use a Satin Stitch Foot to help prevent the fabric from puckering.
When would you use a zig zag stitch?
The most common use of a zigzag stitch is to enclose raw edges as a seam finish. As a seam finish, one edge of the stitch is sewn off the edge of the fabric so that the threads of the fabric are enclosed within the threads of the zigzag stitch making the fabric unable to fray.
Is zigzag stitch necessary?
1 For finishing fabric edges
Finishing the cut edges of fabric is absolutely necessary in sewing for a high-quality sewing and if you do not have a serger for that perfect edge finish you can use the zig zag stitch.
Can I use a zigzag stitch with a walking foot?
Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.
What is the best stitch to use for stretchy fabric?
We recommend using the zigzag stitch on your sewing machine as it allows the fabric to stretch and retract with the thread. The twin needle will do two rows of zigzag stitching, offering a more secure stitch with a professional finish.
What stitch is used for seams?
Two essential stitches create a seam: a construction stitch and a finishing stitch. A construction stitch joins the two pieces of fabric together, while the finishing stitch prevents the raw edge of the fabric from fraying during normal wash and wear.
What stitch should I use to hem?
Use a straight stitch and adjust the stitch length to 3mm. 5. Place the fabric, right side up, under the presser foot and sew at a slow speed to create a beautiful hem.
Do you drop the feed dogs when using a walking foot?
Yes, you can drop the feed dogs even when using a walking foot. … It is also crucial for the quilter to note that while you can use the walking foot for free motion quilting, it cannot effectively make complex designs with tight curves. This restriction is because it is primarily for straight-line sewing.
What stitch length should I use for machine quilting?
The average machine quilting stitch length chosen is between 10 and 11 stitches per inch. This length complements both delicate designs as well as bolder quilting motifs. However, your stitch length may need to change as you increase both your batting thickness as well as your thread thickness.
When should you not use a walking foot?
when not to use a walking foot
Reverse sewing: The foot isn’t designed for use in reverse. The top feed dogs of the walking foot will move the fabric forward and the machine feed dogs will move the fabric backward.
What is a 3 step zigzag stitch?
Three-step zigzag: When used on the widest width, the ordinary zigzag stitch pulls the fabric into a tunnel and the fabric rolls under the stitch — not very desirable. … The needle takes three stitches to one side and then three stitches to the other side, keeping the fabric flat and tunnel-free.
Why is my fabric gathering when I sew?
Tension pucker is caused while sewing with too much tension, thereby causing a stretch in the thread. After sewing, the thread relaxes. As it attempts to recover its original length, it gathers up the seam, causing the pucker, which cannot be immediately seen; and may be noticeable at a later stage.