With your right hand, turn the balance wheel toward you (counterclockwise) until the needle moves down and back up again to its highest position. The upper thread should have caught the lower thread in a loop. Pull the upper thread toward you and the lower thread will come up from the bobbin in a large loop.
Why can’t I get the bobbin thread to come up?
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.
What is raising the bobbin thread?
Ensure that the power is switched off. Raise the needle to the highest point by turning the hand wheel slowly towards you. Gently pull the needle thread to pull up the bobbin thread. …
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why is my bobbin winder not working?
Bobbin winder stopped working (bobbin winder not working, bobbin not winding, bobbin stopped winding) … Check if the thread is passed through the bobbin winding guide correctly. Check if there are scratches or other defects on the bobbin. Replace the bobbin if in doubt.
Can you see bobbin thread on the top?
– If the upper tension is too tight the bobbin thread with be showing on the top side of the material. Press the minus key on the screen to loosen the tension. – If the upper tension is too loose most of the upper thread will be showing on the bottom the material.